The Honeywell E3SA Installation Manual

The Honeywell E3SA installation manual includes several important topics. These include the BACnet protocol implementation conformance statement, Programming menus, Limitation of Honeywell Analytics’ liability, and Repair or replacement of a defective part. By following the installation manual, you’ll be able to program your E3SA with ease.

BACnet protocol implementation conformance statement

The BACnet MS/TP parameters define the baud rate of the device. The default value is 9600 baud. You can change this to another value by manually specifying a new IP address. Autobauding is a feature used only during the start-up of the network. It is set to off by default. Moreover, you should also set the P MAC ADDRESS in the master configuration to match the BACnet MS/TP parameters.

The BACnet MS/TP includes a common error counter and a baud rate counter. Good messages include messages to the current slave and exclude messages from MS/TP token packages. In case of a failure, a BACnet MS/TP will display a MAC ID error code if it has occurred.

Limitation of Honeywell Analytics’ liability

Honeywell Analytics’ liability for defective products is limited to the purchase price of the product. The company is not responsible for special or consequential damages, except in cases of intent or gross negligence. In some cases, the company may have no liability at all. In such cases, the buyer has the right to claim under the warranty of the product.

The company also limits its liability to a maximum of a year from the date of purchase. After this time period, however, it has no further liability. Nevertheless, if there is a defect in a Manning product, the consumer may return the product to Honeywell Analytics. In this case, Honeywell Analytics will determine whether it was caused by defective materials or workmanship.

Programming menus

You can program Honeywell e3SAs in two different ways. You can choose to use an Alphanumeric Keypad or a Fixed English Keypad. Both work well for arming and bypassing sensors. However, Alphanumeric Keypads are better for menu-driven programming because they display relevant information as you move through the menus.

Repair or replacement of a defective part

If you find a defective part in Honeywell e-Series air-conditioners, you can contact the company that made the product. You can contact Honeywell Analytics if you’d like to have the part repaired or replaced. This company will make the process simple.

The company will send you a replacement part if it’s still under warranty. It will be free of charge. If you have any questions about the warranty, feel free to contact customer service or the manufacturer. A technician will diagnose your unit and provide the necessary parts. Then, they will make the repairs.